Category Archives: Services

In most cases, yes — replacing both springs is the smarter move. On a two-spring system, both springs usually have the same age, the same amount of use, and roughly the same number of cycles on them. So if one spring breaks, the other one may not be far behind. Replacing only the broken springContinue reading “Customer FAQ: Should I Replace Both Garage Door Springs If Only One Breaks?”

It can make it worse. If the door is stuck because of a mechanical issue, the opener may continue trying to force it through resistance it was never designed to overcome. That can lead to: ✅ Extra strain on the opener motor✅ Bent or damaged door sections✅ Broken hinges, rollers, or brackets✅ Cable or trackContinue reading “When your garage door stops halfway, binds, or refuses to move, repeatedly hitting the opener button usually doesn’t fix the problem.”

Sometimes a garage door problem looks like it’s going to require a service call when the fix is actually much simpler. On this job, the opener was having trouble closing the door because the safety sensors had been knocked out of alignment. When that happens, the opener may think something is blocking the doorway andContinue reading “Job Spotlight: Misaligned Safety Sensors”

Yes — one bad roller can create more problems than most homeowners realize. Garage door rollers are what allow the door to travel smoothly through the tracks. When one cracks, seizes, bends, or starts coming apart, the rest of the system has to compensate. That can lead to: ✅ Extra strain on the other rollers✅Continue reading “Can One Broken Roller Cause Bigger Problems?”

We helped a customer today who’s getting ready to move into their new home and wanted to start off with dependable garage door openers. We removed the old units and installed two new Chamberlain openers, giving both doors a fresh, reliable setup from day one. When you’re moving into a new home, the garage doorContinue reading “New home, new openers, one less thing to worry about.”

This is a good example of why you shouldn’t ignore a garage door that’s starting to bow, flex, or move out of shape. In this video, the panels had become so badly bent that I had to manually push each section back into place just to get the door to come down. At that point,Continue reading “A Slight Bow Can Turn Into a Full Door Replacement”

This customer’s old garage door had become badly bowed and out of shape. As the door came down, the distorted sections were causing it to bind and get stuck, making normal operation difficult and unreliable. At that point, replacing a few parts wasn’t going to solve the real problem. So we removed the damaged doorContinue reading “Sometimes repair isn’t the right answer — replacement is.”

Halfway through the month is a good time to give your garage door a quick once-over. You don’t need to take anything apart or make adjustments yourself. Just spend a few minutes looking and listening for changes. Here’s a simple checklist: ✅ Listen while the door runsGrinding, popping, squeaking, or rattling can be signs thatContinue reading “Mid-Month Garage Door Maintenance Check”

We recently worked on a garage door where the top panel was bending and sagging while the door was in the open position. That sag was causing the section to lose its shape, which made it harder for the door to travel back down and close properly. The customer was understandably concerned that they mightContinue reading “Sometimes the door doesn’t need to be replaced — it just needs the right support.”

This customer had a failed Wayne Dalton TorqueMaster spring system, so instead of putting the same style system back in, we converted the door over to a traditional torsion spring setup. Traditional torsion systems are generally easier to service, more straightforward to inspect, and use components that are widely available. They also give us aContinue reading “Out with the TorqueMaster. In with a traditional torsion system.”